Get Smart with 200 355 pdf

200-355 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

Download 200-355 Dumps Free

Our pass rate is high to 98.9% and the similarity percentage between our 200 355 wifund study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco ccna wireless 200 355 official cert guide exam in just one try? I am currently studying for the Cisco 200 355 vce exam. Latest Cisco ccna wireless 200 355 pdf download Test exam practice questions and answers, Try Cisco ccna wireless 200 355 official cert guide pdf free download Brain Dumps First.

If you would certainly such as to recognize more concerning 200-355 exam, call us or merely visit us at our internet 2PASSEASY.COM site.

Q1. A customer is deploying the Cisco 5508 Wireless Controller in a unified wireless solution. Which command must be configured on the neighboring switch port if the management interface on the WLC is configured to send untagged traffic to ensure that management traffic utilizes VLAN 10? 

A. switchport trunk native vlan 10 

B. spanning-tree portfast 

C. switchport trunk allowed vlan 10 

D. channel-group 10 


Q2. The network administrator has used VLANs to separate VoIP frames from data frames in the wired network. What must the administrator use to separate those frames in the wireless network? 

A. multiple SSIDs 

B. multiple authentications 

C. multiple WEP or WPA keys 

D. multiple channels 

E. multiple 802.11 radios (a, b, g, n) 


Q3. Refer to the exhibit. 

A wireless network that consists of Cisco Aironet 1260 APs and Cisco 2100 Series WLC has been correctly configured with Cisco WCS version 7, which is also used for management. The CleanAir Zone of Impact is not visible for the respective Cisco WCS maps. 

Which two issues are causing the problem? (Choose two.) 

A. software version 

B. AP 

C. Cisco WLC 

D. Cisco MSE 

E. Cisco WCS 

F. Cisco WCS is not enabled. 

Answer: B,D 

Q4. What is the function of the Cisco AnyConnect DART tool? 

A. creates a compressed bundle of client logs and information 

B. visualizes a WLAN environment, showing the possible locations of problems 

C. gathers statistics from neighboring clients for comparison to the baseline 

D. helps to troubleshoot a WLAN connection by using easy-to-use wizards and statistic viewers 


Q5. You are testing a new autonomous Cisco Aironet 1260 AP that has booted for the first time on the existing corporate network, which includes voice, data, and location services. 

How do you reach the GUI of the AP? 

A. HTTP to 

B. HTTP to 

C. HTTP to the DHCP address. 

D. HTTPS to 

E. HTTPS to the 

F. HTTPS to the DHCP address. 




Q7. Refer to the exhibit. 

You made a manual configuration change to a controller and now you need to compare the controller configuration seen on Cisco WCS to the configuration that is present in the controller. 

Which menu can you use to do compare the configurations? 

A. Reports 

B. Monitor 

C. Configure 

D. Services 

E. Administration 

F. Tools 


Q8. An engineer is troubleshooting why wireless clients have not been able to connect to the network. Where would an engineer verify the total number of excluded clients in the last day? 

A. Security > Miscellaneous 

B. Security > Rogues 

C. Alarms 

D. Events 

E. Clients > Troubleshoot 

F. Access Points 


Q9. Access points must discover a wireless LAN controller before they can become an active part of the network. In which order does an access point try to discover a controller? 

A. Layer 3 CAPWAP or LWAPP broadcast discovery DHCP option 43 Locally stored controller IP address discovery DNS controller name resolution 

B. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DNS controller name resolution DHCP option 43 

C. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DHCP option 43 DNS controller name resolution 

D. DNS controller name resolution DHCP option 43 Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery 


Q10. A customer has asked for its wireless equipment to be managed as securely as possible. Which three management protocols will provide encrypted access to the equipment? (Choose three.) 

A. Secure Shell 


C. SNMPv3 

D. Telnet 

E. SNMPv2c 


Answer: A,B,C 

Q11. After installing a Cisco 5508 Wireless Controller using the default settings, how often will the RRM update occur? 

A. 30 seconds 

B. 60 seconds 

C. 300 seconds 

D. 600 seconds 

E. 3600 seconds 

F. 7200 seconds 


Q12. You have an Apple IOS iPhone4 that is used on your home Wi-Fi network and a personal laptop that is used on your work's enterprise wireless network. At your office, you are unable to see the enterprise wireless network on your iPhone4. 

What is the most likely cause of this issue? 

A. WPA2 CPU intensive encryption is not supported on the client. 

B. WPA2 must be enabled on the client. 

C. A new profile must be created on the client. 

D. Wi-Fi must be enabled on the client. 

E. The enterprise is 2.4 GHz only. 

F. The enterprise is 5 GHz only. 

G. The RF channel must be adjusted on the client. 


Q13. Refer to the exhibit. 

What does the yellow shield with the exclamation mark indicate? 

A. The network uses open authentication and no encryption. 

B. The network uses an unsupported channel. 

C. The signal is too distorted to connect. 

D. The AP that is transmitting this SSID uses the wrong RF domain. 

E. This is the ad-hoc network. 


Q14. What two capabilities would be present on a wireless client device that supports CCXv3? (Choose two.) 

A. WPA2 

B. 802.1x 





Answer: A,B 

Q15. Refer to the exhibit. 

Which GUI item do you click to configure maps with APs in Cisco WCS? 

A. Configure 

B. Client 

C. CleanAir 

D. Services 

E. Administration 

F. Monitor