Resources to 300 075 dump


If you would certainly such as to recognize more concerning 300-075 exam, call us or merely visit us at our internet 2PASSEASY.COM site.

Q91. When a call is made from a video endpoint to a Cisco TelePresence EX90 that is registered to a Cisco VCS Control, which portion of the destination URI is the first match that is attempted? 

A. the full URI, including the domain portion 

B. the destination alias, without the domain portion 

C. the E.164 number that is assigned to the Cisco TelePresence EX90 

D. the directory number that is assigned to the Cisco TelePresence EX90 

Answer:


Q92. Refer to the exhibit. 

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of? 

A. First route group should point only to the U.K. gateway. The second route group should point to the U.S. gateway. 

B. First route group should be only the local route group. The second route group should point to the U.S. gateway. 

C. First route group should point only to the U.S. gateway. The second route group should be the local route group. 

D. The TEHO-US route list should contain only the local route group. The globalized configuration means that the appropriate gateway will be selected automatically. 

E. The \\+! route pattern should point directly to the U.S. gateway. 

Answer:

Explanation: 

Incorrect Answer: A, B, D The route group points to one or more gateways and can choose the gateways for call routing based on preference. The route group can serve as a trunk group by directing all calls to the primary device and then using the secondary devices when the primary is unavailable. One or more route lists can point to the same route group. Link: 

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08 gw.html#wp1167274 


Q93. How is the region assigned to a device such as an IP phone? 

A. Regions are assigned directly in the device configuration page. 

B. Regions can be assigned only through a device pool. 

C. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device pool region configuration takes precedence. 

D. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device region configuration takes precedence. 

Answer:


Q94. Which action configures CAC utilizing only Cisco Unified Communications Manager software? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure Cisco Unified Communications Manager locations. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager MTPs. 

Answer:


Q95. Which option indicates the best QoS parameters for interactive video? 

A. 1% Max Loss, 150 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning 

B. 5% Max Loss, 5 s One-way Latency, 30 ms Jitter, 20% Overprovisioning 

C. 0% Max Loss, 100 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning 

D. 1% Max Loss, 160 ms One-way Latency, 60 ms Jitter, 10% Overprovisioning 

Answer:


Q96. Which commands are needed to configure Cisco Unified Communications Manager Express in SRST mode? 

A. telephony-service and srst mode 

B. telephony-service and moh 

C. call-manager-fallback and srst mode 

D. call-manager-fallback and voice-translation 

Answer:


Q97. When multiple Cisco Extension Mobility profiles exist, which actions take place when a user tries to log in to Cisco Extension Mobility? 

A. The login will fail because only a single Cisco Extension Mobility profile is allowed. 

B. The user must select the desired profile. 

C. The user must login to both profiles in the order they are presented. 

D. The user may login to both profiles in any order. 

E. Login will only be allowed to multiple profiles if the service parameter Allow Multiple Logins is enabled. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E Users access Cisco Extension Mobility by pressing the Services or Applications button on a Cisco Unified IP Phone and then entering login information in the form of a Cisco Unified Communications Manager UserID and a Personal Identification Number (PIN). If a user has more than one user device profile, a prompt displays on the phone and asks the user to choose a device profile for use with Cisco Extension Mobility. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsem.html 


Q98. Refer to the exhibit. 

Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship? 

A. the label name specified in the router eigrp command 

B. the autonomous-system number specified in the service-family ipv4 autonomous-system command 

C. the sf-interface configuration 

D. the topology base configurations 

E. the label name specified in the router eigrp command and the autonomous-system number 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E service-family ipv4 autonomous-system 1 enables a Cisco SAF service family for the specified autonomous system on the router Link: 

http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1056363 


Q99. Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.) 

A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses. 

B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses. 

C. Create one neighbor zone in VCS for each Unified CM node. 

D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node. 

E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node. 

Answer: A,D 


Q100. Which method can be used to address variable-length dial plans? 

A. Overlap sending and receiving. 

B. Add a prefix for all calls that are longer than 10-digits long 

C. Use nested translation patterns to eliminate inter-digit timeout 

D. Use the @macro on the route pattern 

E. Use MGCP gateways, which support variable-length dial plans 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E If the dial plan contains overlapping patterns, Cisco Unified Communications Manager does not route the call until the interdigit timer expires (even if it is possible to dial a sequence of digits to choose a current match). Check this check box to interrupt interdigit timing when Cisco Unified Communications Manager must route a call immediately. By default, the Urgent Priority check box displays as checked. Unless your dial plan contains overlapping patterns or variable length patterns that contain!, Cisco recommends that you do not uncheck the check box. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsintrcm.htm