300 075 pdf? Tips for success

we provide High quality Cisco 300 075 pdf testing engine which are the best for clearing cisco 300 075 test, and to get certified by Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2). The 300 075 pdf Questions & Answers covers all the knowledge points of the real cisco 300 075 exam. Crack your Cisco cisco 300 075 Exam with latest dumps, guaranteed!

If you would certainly such as to recognize more concerning 300-075 exam, call us or merely visit us at our internet 2PASSEASY.COM site.

Q16. Which three options are supplementary services that are affected by MTP? (Choose three.) 

A. Call Hold 

B. Call Transfer 

C. Call Park 

D. Call Pickup 

E. Speed Dial 

F. Call Back 

Answer: A,B,C 

Q17. The corporate WAN has been extended to two newly acquired sites and it includes gatekeeper support. Each site has a Cisco CallManager and an H.323 gateway that allows connection to the PSTN. Which connection method is best for these two new customers? 

A. H.225 trunk (gatekeeper-controlled) 

B. intercluster trunk (non-gatekeeper controlled) 

C. SIP trunk 

D. intercluster trunk (gatekeeper-controlled) 


Q18. Refer to the exhibit. 

How does the Cisco Unified Communications Manager advertise dn-block 2? 

A. 14087071222 with number type international 

B. +14087071222 with number type international 

C. +14087071222 

D. 14087071222 


Q19. When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully? 

A. dial peers that address all sites in the multisite cluster 

B. translation patterns that apply to the local PSTN for each gateway 

C. incoming and outgoing COR lists 

D. configuration of the gateway as an MGCP gateway 


Q20. Which action configures the registration of transcoder resources? 

A. Cisco IOS software registers transcoder resources with SIP. 

B. Cisco IOS software registers transcoder resources with SCCP. 

C. Cisco IOS software registers transcoder resources with H.323. 

D. Cisco IOS software does not register transcoder resources. 


Q21. Cisco Unified Communications Manager is configured with CAC for a maximum of 10 voice calls. 

Which action routes the 11th call through the PSTN? 

A. Configure an SIP trunk to the ISR. 

B. Configure Cisco Unified Communications Manager AAR. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager locations. 


Q22. What user profile is used to define the settings for a user on login? 

A. Device Profile 

B. Group Profile 

C. Pool Profile 

D. Specific Profile 


Q23. Which E.164 transformation pattern represents phone numbers in Germany? 

A. \\+49.! 

B. 49.! 

C. \\49.! 

D. \\+49.X 


Q24. The relationship between a Region and a Location is that the Region codec parameter is combined with Location bandwidth when communicating with other Regions. 





Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1033331 

Q25. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones? 

A. Configure the branch office IP phones with CSS and partitions. 

B. Configure the branch office IP phones with MRGs and MRGLs. 

C. Configure the branch office IP phones with regions. 

D. Configure the branch office IP phones with locations. 


Q26. Refer to the exhibit. 

With the Mobile Connect feature configured, when the PSTN phone calls the Enterprise user at extension 3001, the Enterprise user's mobile phone does not ring. Which CSS is responsible for ensuring that the correct partitions are accessed when calls are sent to the Enterprise user's mobile phone? 

A. the gateway CSS 

B. the Phone Device CSS 

C. the Remote Destination Profile CSS 

D. the Remote Destination Profile Rerouting CSS 

E. the Phone Line (DN)CSS 



Incorrect Answer: A, B, C, E 

Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmfeat/fsmobmgr .html 

Q27. Refer to the exhibit. 

Which option describes the effect of this configuration? 

A. It implements Cisco United CME redundancy. 

B. It creates dial peers. 

C. It configures failover. 

D. It configures a standby Cisco United CME. 

E. It implements HSRP. 

F. It implements Cisco IOS redundancy. 


Q28. Which three of the following are steps in configuring MGCP Fallback and Cisco Unified SRST? (Choose three) 

A. Define the SRST reference for phones in the Device Pool configuration 

B. Enable and configure the MGCP fallback and Cisco Unified SRST features on the IOS gateways. 

C. Implement a simplified SRST dial plan on the remote-site-gateways to ensure connectivity for remote-site phones in SRST mode. 

D. Enable SIP trunking between both remote and hub sites to provide mesh coverage. 

E. Define the SRST reference in the configuration on the IP Phones. 

F. Enable and configure the MGCP fallback on the IOS gateway but not Cisco Unified SRST since it is enabled automatically. 

Answer: A,B,C 

Q29. In what Cisco solution is Simple Network-Enabled Auto Provision technology used? 

A. Cisco Unified Gateway Duplication 

B. Cisco Unified CallManager Redundancy 

C. Cisco Unified SRST 

D. Cisco Unified Call Survivability 



Incorrect Answer: A, B, D When the system automatically detects a failure, Cisco Unified SRST uses Simple Network Auto Provisioning (SNAP) technology to auto-configure a branch office router to provide call processing for the Cisco Unified IP phones that are registered with the router Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesr st.html 

Q30. Which three options describe the main functions of SAF Clients? (Choose three.) 

A. registering the router as a client with the SAF network B. providing publishing services to the SAF network 

C. subscribing to SAF network services 

D. registering Cisco Unified Communications Manager subscribers with the publisher 

E. starting Cisco Unified Communications Manager services throughout the cluster 

F. integrating with Cisco IM and Presence for additional services 

Answer: A,B,C