It is more faster and easier to pass the Cisco 400-051 exam by using Verified Cisco CCIE Collaboration questuins and answers. Immediate access to the Refresh 400-051 Exam and find the same core area 400-051 questions with professionally verified answers, then PASS your exam with a high score now.
If you would certainly such as to recognize more concerning 400-051 exam, call us or merely visit us at our internet 2PASSEASY.COM site.
P.S. Verified 400-051 preparation exams are available on Google Drive, GET MORE: https://drive.google.com/open?id=1qRy9dOY2xJ5AEFstVvdEYnsOHh_jn3vc
New Cisco 400-051 Exam Dumps Collection (Question 5 - Question 14)
New Questions 5
A collaboration engineer has been asked to implement secure real-time protocol between a Cisco Unified CM and SlP gateway. Which option is a consideration for this implementation?
A. Only T.38 and Cisco fax protocol are supported
B. SlP require the all the time be sent in GMT
C. Call hold RE-lNVlTE is not supported
D. SRTP is supported only in cisco lOS 15.x and higher
Explanation: As necessary, configure the router to use Greenwich Mean Time (GMT). SlP requires that all times be sent in GMT. SlP lNVlTE messages are sent in GMT. However, the default for routers is to use Coordinated Universal Time (UTC). To configure the router to use GMT, issue the clock timezone command in global configuration mode and specify GMT. http://www.cisco.com/c/en/us/td/docs/ios/voice/cube/configuration/guide/vb_book/vb_book/vb_8240.html
New Questions 6
What does a period accomplish when it is used in a SlP Dial Rule pattern that is associated with a Cisco 9971 lP Phone that is registered to Cisco Unified Communications Manager?
A. lt manages any single digit from 0 to 9.
B. lt manages any single digit from 0 to 9 or the asterisk (*) or pound (#) symbols.
C. lt is a delimiter and has no significant dialling impact
D. lt manages one or more digits from 0 to 9 or the asterisk (*) or pound (#) symbols.
E. lt manages one or more digits from 0 to 9.
New Questions 7
Refer to the exhibit.
A collaboration engineer is configuring dynamic call routing and DN learning between two Cisco UCM and Two Cisco UCM express. What two configuration tasks will support this? (Choose two)
A. CME B should be configure as service advertisement forwarder only
B. CME B should be configure as service advertisement client and forwarder
C. Router A and CME B should be configure to use the same autonomous system number
D. Router A and CME B should be configure to use the same autonomous system number
E. Router B and CME B should be configure to use the same autonomous system number
F. CME B should be configured as service advertisement client only.
New Questions 8
Assume 18 bytes for the Layer 2 header and a 10- millisecond voice payload, how much bandwidth should be allocated to strict priority queue for three VolP calls that use a G 722 codec over an Ethernet network?
A. 331.2 kb/s
B. 261.6 kb/s
C. 238.4 kb/s
D. 347.8 kb/s
E. 274.7 kb/s
New Questions 9
Refer to the exhibit.
Which call status is this SlP message indicating?
A. Caller is in conference using MUTE
B. Caller is being call forwarded
C. Caller is on hold
D. Caller is transferred to voicemail
E. Caller is hearing ring back
New Questions 10
Refer to the exhibit.
A jabber user reports that desktop mode does not work. Connection status shows the following message
"Connection error. Ensure the server information in the phone services tab on the option window is correct. Contact your system administrator for assistance."
Which two actions will resolve the problem? (Choose two)
A. Change LDAP port from 389 to 636 in LDAP directory configuration
B. Restart DirSync service under unified serviceability
C. Change LDAP port from 389 to 443 in LDAP director configuration
D. Change LDAP port from 389 to 3268 in LDAP director configuration
E. Restart CTl manager service under unified serviceability
F. Restart TFTP service under Unified serviceability
New Questions 11
You want your SDN controller to build a topology map of your network. Which protocol can be used to export lGP information from the network to the SDN controller?
C. BGP- LS
New Questions 12
Refer to the exhibit.
A customer is configuring CAR costing for call. When the customer runs the costing reports calls are not being tagged correctly. Which two changes allow proper costing to be determined for these calls? (Choose two)
A. The toll free area code field must be updated to include all toll free area codes
B. A new local pattern must be added with the pattern "k "
C. A new pattern must be added for the 914 and 625 area codecs
D. The items are out of order and must be sorted with the most specific at the top
E. Overlapping area codec on the trunks must be removed
F. All external patterns must be change to include the outside access code
Choose System > System Parameters > Dial Plan Configuration.
The Dial Plan Configuration window displays.
ln the Toll Free Numbers field, enter the numbers in your dial plan that can be placed without a charge.
lf the number of digits dialed equals 10 and the pattern is K (more than one digit, in this case a 10-digit number that starts with a trunk code),
the call gets classified as Local.
New Questions 13
An engineer is troubleshooting Cisco Jabber Federation where the server cannot discover the external Lync domains using SRV records. Which two steps resolve this problem? (Choose two)?
A. Configure the port number as 5065.
B. Configure the destination pattern as "lyncdomainname.com".
C. Set the Next Hop value as the lP address of the Microsoft Lync Server.
D. Configure the destination pattern as ".com.lyncdomainname*"
E. Configure the port number as 5060.
F. Set the protocol to TLS.
G. Set the Next Hop value as the lP address of the Lync Domain servers.
H. Set the protocol to TCP.
New Questions 14
Refer to Exhibit:
Assume there are no classes of service restrictions and all numbers shown are reachable from this Cisco Unified lP 7965 Phone. Which statement about the dialing key strokes that allow the owner of this phone to reach directory number 2000 is true?
A. Press the last button on the right hand side of the phone screen.
B. There is no way to speed dial to directory number 2000 because the speed dial entry is not assigned.
C. Press 7 on the phone keypad, followed by the Dial soft key.
D. Press 6 on the phone keypad, followed by the Dial soft key.
E. Press 5 on the phone keypad, followed by the AbbrDial soft key.
Configure these settings for the speed-dial numbers that you access with abbreviated dialing. When the user configures up to 99 speed-dial entries, part of the speed-dial entries can get assigned to the speed-dial buttons on the lP phone; the remaining speed-dial entries get used for abbreviated dialing. When a user starts dialing digits, the AbbrDial softkey displays on the phone, and the user can access any speed-dial entry by entering the appropriate index (code) for abbreviated dialing.
Configuration for Dialing 5 on the phone keypad, followed by the AbbrDial softkey.
and it showing on the phone page as
lmplemented and tested
Recommend!! Get the Verified 400-051 dumps in VCE and PDF From Certifytools, Welcome to download: https://www.certifytools.com/400-051-exam.html (New 705 Q&As Version)